|
NMIs or NMI-designated institutes, which carry out on materials metrology,
are eligible for the
full member of the ANMET. The number of representatives can be up to 3 institutions from each
APEC member economy. At present, the following institutions participate in the ANMET as full member.
<Contact>
Prof.
Robert N. Lamb
Head of School of Chemical Sciences
The University of New South Wales
Sydney 2052, Australia
Email: R.Lamb@unsw.edu.au
Prof. Alan Buckley
Surface Science and Technology
School of Chemical Sciences
The University of New South Wales
Sydney 2052, Australia
Tel: (61 2) 9385 4645
Fax: (62 2) 9662 1697
Email: a.buckley@unsw.edu.au
<Contact>
Dr. David Lockwood
Surfaces and Interfaces Group
Institute for Microstructural Sciences (IMS)
National Research Council of Canada
1191 Montreal Road
Ottawa, Ontario K1A 0R6
Canada
Tel: (613) 993 9614
Fax : (613) 993 6486
Email: David.Lockwood@nrc-cnrc.gc.ca
<Contact>
Prof. Wu Yang
Shanghai Research Institute of Materials (SRIM)
99 Handan Road, Shanghai 200437
P. R. China
Tel: (86 21) 5554 1230
Fax: (86 21) 6555 2554
Email: wyang@srim.com.cn
- Shanghai Institute of Ceramics (P. R. China)
<Contact>
Dr. Shangjun Zhuo
Director, Analysis and Testing Center for Inorganic Materials
Shanghai Institute of Ceramics, Chinese Academy of Science
1295 Dingxi Road, Shanghai 200050
P. R. China
Tel: (86 21) 5241 3204
Fax: (86 21) 5241 3903
Email: sjzhuo@mail.sic.ac.cn
- National Institute of Metrology (P. R. China)
<Contact>
Dr. Duan Yuning
National Institute of Metrology (NIM)
No. 18, Bei San Huan Dong Lu, Beijing 100013
P. R. China
Tel: (86 10) 6428 4859
Fax: (86 10) 8425 2142
Email: duanyn@nim.ac.cn
<Contact>
Dr. Jeah-Sheng Wu
Mechanical Measurement Laboratory
Measurement Standards and Technology Division
ITRI Center for Measurement Standards
Bldg. 8, 321, Section 2, Kuang Fu Rd.
Hsinchu, Taiwan 300
Chinese Taipei
Tel: (886 3) 574 3792
Fax: (886 3) 572 4952
Email: jswu@itri.org.tw
- National Physical Laboratory (India)
<Contact>
Dr. Krishan Lal
Director, National Physical Laboratory (NPL)
Dr. K. S. Krishnan Road, New Delhi 110012
India
Tel: (91 11) 585 1440
Fax: (91 11) 585 2678, 576 4189
Email: klal@csnpl.ren.nic.in
or dnpl@csnpl.ren.nic.in
<Contact>
Dr.
Isao Kojima
Director, Materials Characterization Division
National Metrology Institute of Japan (NMIJ)
AIST Tsukuba Central-3, 1-1-1, Umezono, Tsukuba, Ibaraki 305-8563
Japan
Tel: (81 298) 61 4111
Fax: (81 298) 61 4007
Email: i.kojima@aist.go.jp
<Contact>
Dr. Gun Woong Bahng
Principal Researcher
Division of Chemical Metrology and Materials Evaluation
Korea Research Institute of Standards and Science (KRISS)
1, Doryong-Dong, Yusong-Gu, Daejeon 305-340
Rep. of Korea
Tel: (82 42) 868 5320
Fax: (82 42) 868 5032
Email: gwbahng@kriss.re.kr
<Contact>
Dr. Azmi Hj. Idris
Senior General Manager
Advanced Materials Research Centre (AMREC)
SIRIM Berhad
Lot 34, Jalan Hi-Tech 2/3
Kulim Hi-Tech Park
09000 Kulim
Kedah Darul Aman
Malaysia
Tel : 60-4-403 3214 / 403 3207
Fax : 60-4-403 3224
Email: azmi_idris@sirim.my
<Contact>
Dr. Yoshito Mitani
Director de Metrologia de Materiales
Centro Nacional de Metrologia
km 4,5 Carretera a Los Cues, Mpio de El Marques
Queretaro, MEXICO C.P. 76241
Tel: (52) 4422110560
Fax:(52) 4422110569
Email: yoshito.mitani@cenam.mx
<Contact>
Dr. Ernesto P. Lozada
Director, Industrial Technology Development Institute (ITDI)
DOST Cpd., Gen. Santos Ave., Bicutan, Taguig, Metro Manila
Philippines
Tel: (63 2) 837 2071 (ext. 2182)
Fax: (63 2) 837 3167
Email: epl@dost.gov.ph
Dr. Severino T. Bernardo
Deputy Director for R&D, Industrial Technology
Development Institute (ITDI)
DOST Cpd., Gen. Santos Ave., Bicutan, Taguig, Metro Manila
Philippines
Tel: (63 2) 837 2071 (ext. 2182)
Fax: (63 2) 837 3167
Email: verber@dost.gov.ph
<Contact>
Prof. Leonid A. Konopelko
Deputy Director
D.I. Mendeleyev Scientific and Research Institute for Metrology (VNIIM)
19 Moskovsky pr.,
St. Petersburg 190005
Russia
Tel: (7 812) 315 1145
Fax: (7 812) 327 9776
Email: nop@mail.rcom.ru or lkonop@b10.vniim.ru
<Contact>
Ms. Nattanit Pongjeerakumchorn
Head, International Relations Section
National Institute of Metrology, Thailand(NIMT)
75/7 Rama VI Road, Thungphyathai, Rajthevi, Bangkok 10400
Thailand
Tel: (66 2) 248 2181
Fax: (66 2) 354 0839
Email: iro@nimt.or.th
<Contact>
Dr. Chutima Eamchotchawait
Director, Material Technology Department
Thailand Institute of Scientific and Technological Research(TISTR)
196 Phahonyothin Rd, Chatuchak, Bangkok 10900
Thailand
Tel: (66 2) 579 1121
Fax: (66 2) 579 7728
Email: chutima@tistr.or.th
<Contact>
Dr. Paritud Bhandhubanyong
Director, National Metal and Materials Technology Center (NMTC)
114 Paholyothin Road, Klong 1, Klong Luang, Pathumthani 12120
Thailand
Tel: (66 2) 564 6354
Fax: (66 2) 564 6503
Email: paritud@mtec.or.th
<Contact>
Dr. Stephen Freiman
Deputy Director, Materials Science and Engineering Laboratory
National institute of Standards and Technology (NIST)
Gaithersburg, MD 20899
USA
Tel: (1 301) 975 6119
Fax: (1 301) 975 5334
Email: Stephen.Freiman@nist.gov
- Institute of Materials Science (Vietnam)
<Contact>
Prof. Phan Hong Khoi
Director, Institute of Materials Science (IMS)
Vietnamese Academy of Science and Technology (VAST)
18 Hoang Quoc Viet Road, Cau Giay District, Hanoi
Vietnam
Tel: (84 4) 756 2737
FAX: +844 7564129; +844 7566489
Email: phkhoi@ims.vast.ac.vn
|